Description

Legends Cue Zest Wax & Grain Filler Twin Pack

Legends Grain Filler & Cue Restorer – Legends Grain Filler is designed for easy application; it will fill the grain correctly and highlight the grain’s natural arrows and grain lines of any Ash cue shaft.

Instructions:

To ensure Legends Grain Filler is applied correctly, please follow the following guidelines:

  1. Make sure the area is clear/clean of any lacquer or finishing products.
  2. It is important to “open” the grain and prep the wood correctly for the Legends Grain Fillers to work effectively.
  3. Opening the grain can be done with a small, fine, brass bristle brush; rubbed lightly over the cue grain.
  4. Using a small soft cotton cloth, apply small amounts of Legends grain filler to the required area of the cue shaft. Make sure the grain is fully filled.
  5. After 30 seconds, and with a new cotton cloth; rub away the excess fillers. Repeat steps 4-5 if you require a darker finish.
  6. With super fine 0000 grade wire wool, very lightly remove excess filler and leave clean and smooth before you apply your preferred Finish.

Safety notes:

  • Protective gloves are recommended, steps should be taken to minimize skin contact. If this happens, please clean immediately with suitable solvent based or specialist cleaners. Do not use water!
  • If you feel unwell or develop a skin reaction, please seek medical advice.

Legends Cue Zest Wax – No More Oil. Legends 100% natural Cue Zest Wax,

  • Brings out the natural colour and texture in wood grain to a super high finish.
  • Non-toxic and eco-friendly.
  • Penetrates deep into the grain and protects well against changes in humidity.
  • The ultimate cue care product that works great after using legends grain fillers

Instructions:

To ensure Legends Cue Wax is applied correctly, please follow the following guidelines:

  1. Make sure the area is clear/clean of any lacquer or finishing products.
  2. Ensure the Cue is clean, and free from grime & dirt.
  3. Using a soft cotton cloth, apply a small amount of the Legends Cue Zest Wax to the Cue.
  4. Leave to dry for 15-25 minutes for best results.
  5. When Wax is dry, remove any excess with a clean Microfibre cloth.
  6. Repeat process for your desired shine and finish.

Footnote:

Testing is currently underway at Legends Cue Sports for a companion Microfibre Cloth for this product. Stay tuned in the coming weeks for more.